| Size |
Rack panel front:
1.75 x 19 (inches); 45.5
x 482.6 mm
Rear housing:
1.75 x 12 x 5.75 (inches); 44.5
x 304.8 x 146.1 (mm) |
| |
|
| Power |
Rack panel front:
1.75 x 19 (inches); 45.5
x 482.6 mm
Rear housing:
1.75 x 12 x 5.75 (inches); 44.5
x 304.8 x 146.1 (mm) |
| |
|
| Temp. Range RF Protection |
0° to 50° Celsius, 32° to 122° Farenheit |
| |
|
| Stereo Sep. Isolation Gain |
Better than 60 dB Greater than 40 dB between
outputs Unity to all outputs. Optional adjustable terminations
available. |
| |
|
| Intermod Input (Rear) |
Any two frequencies, 50 Hz to 53 Hz in a
ration of 1:1
(Rear) Floating BNC connector, 1 to 10 volts peak to peak,
15 kohms |
| |
|
| Outputs (Rear) |
Four BNC connectors, 1 to 10 volts, minimum
load impedence 50 ohms. Unconditionally stable regardless
of load capacitance |
| |
|
| Test Output |
BNC connector, 1 to 10 volts peak to peak.
Minimum load impedance 1000 ohms |
| |
|
| Noise |
Broadband noise (20 Hz to 100 kHz), better
than 85 dB below 4 volts peak to peak |
| |
|
| Distortion |
at 4 volts peak to peak total: -70 dB or 0.032%. Any
frequency 50 Hz to 53 kHz with any other frequency 53 kHz
to 100 kHz, in a ratio of 10:1 at 4 volts, peak to peak
total:
-70 dB or 0.032% |
| |
|
| Freq. Resp. Group Delay |
±0.01 dB DC to 53 kHz, typically -1
dB at 1 MHz. ±20 nanoseconds, relative to 38
kHz or 31.468 kHz (2H). |
| |
|
| Because of the difficulty in
generating and measuring stereo signals with separations
greater than 50dB, Modulation Sciences developed a computer
program to convert from composite transmission gain and
phase measurement to stereo separation. Listing of this
program in either BASIC or Pascal are available from
MSI. |
